Good Quality Solar Led Wall Light - 60W 80W 120W IP65 light weight – JUTONG
Good Quality Solar Led Wall Light - 60W 80W 120W IP65 light weight – JUTONG Detail:
MORE THAN 12 YEARS EXPERIENCE
·UN and NGO supplier
Products applied in more than 114 countries
To produce a monocrystalline silicon cells, absolutely pure semiconduction material is necessary. Monocrystalline rods are extracted from melted silicon and then sawed into thin plates.This production process guarantees a relatively high level of efficiency silicon and makes monocrystalline panels one of the most efficient, producing smaller solar cells, and therefore smaller panels. Monocrystalline works very well in bright cool conditions.
Specification
| Peak Power(PMP) | 100W | 160W | 200W | 260W | 320W |
| Tolerance | ± 3% | ||||
| Maximum power current(IMP) | 5.55A | 8.33A | 5.56A | 8.34A | 8.34A |
| Maximum power voltage(VMP) | 18V | 18V | 36V | 30V | 36V |
| Short-Circuit Current(ISC) | 5.89A | 8.83A | 5.89A | 8.83A | 8.83A |
| Open-Circuit Voltage(VOC) | 21.6V | 21.6V | 43.2V | 36V | 43.2V |
| Maximum System Voltage | 1000VDC | ||||
| F.F | 73% | ||||
| Module eff. | 20% | 20% | 20% | 20% | 20% |
| All technical data at standard test condition:AM=1.5, E=1000W/m², Tc=25℃ | |||||
Technical Parameters
| Type of battery | poly |
| Number of cells | 144（6×24） |
| Maximum power | 350W |
| Highest efficiency | 17.4% |
| Junction Box | IP68 |
| Maximum system voltage | 1000V/1500V DC（IEC） |
| Operating temperature | -40℃～+85℃ |
Quality Controlling
A. Before production
-Control of raw material before use
-Data recording of raw material→products traceability
B. During production
-Control at each step of production
-Validation of each step by quality controllers
C. After production
-Systematic flash test on each PV modules
-Quality control with IEC compliance
-Tests in our facility testing
-Optional: Third party inspection before shipment if needing.
Electrical Parameters AT STC
Product Feature
Higher output power
Lower temperature coefficient
Less shading effect
Better mechanical loading tolerance
Production Process
Product detail pictures:
Related Product Guide:
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Good Quality Solar Led Wall Light - 60W 80W 120W IP65 light weight – JUTONG , The product will supply to all over the world, such as: Johannesburg, Madras, Tajikistan, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Tony from Nicaragua - 2017.02.28 14:19
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Erin from Uruguay - 2018.12.05 13:53
